Garment steamer maintenance method

descaling

After using the steamer for a long time, do you feel that the amount of steam injection is significantly reduced than before, and the effect of ironing clothes is getting worse and worse, indicating that there is lime or precipitated scale on the metal parts of the main body of the steamer. So it should be cleaned up. The methods of removing scale and lime deposits are as follows:

1. Add about 10 grams of citric acid or a drop of rice vinegar to the bucket, and add water at a ratio of 2/3.

2. After turning on the power, spray steam and wait for the mixture of citric acid and water to reduce to half.

3. Turn off the power and after 10 minutes, completely drain the mixture of citric acid and water in the bucket.

4. After repeating the above process 2 to 3 times, only fill up the water for the last time and spray steam. At this point, the lime precipitation has been completely removed.

clean

1. Before cleaning, please confirm that the plug is unplugged and the power supply is cut off.

2. Clean the container inside the pot, usually every three months.

3. First remove the safety cap, fill the container with water, block the mouth of the container with your thumb, shake it for a while and then empty it. Repeat the above steps 2-3 times to clean it.

4. Do not add chemical solvents such as descaling agents to clean water